| FAQ
> 2+2
Jacking Points
This
answer was provided by Jim Hearne via the SmartGroup
Where are the jacking points on the 2+2?
Anywhere
under the front chassis frame or the 2 outriggers that the
bonnet bolts to will do. I usually jack it up under the centre
of the chassis rail and put an axlestand under each outrigger
but if you do make sure the stands are far enough back that
the bonnet frame doesn't hit them. Also, be careful with a
small jack especially if you use a bit of wood as it can slip
off the chassis rail.
Contact
:
Stephen
Kodz |
